New Jabsco belt-driven diaphragm bilge pump. Part number 36600-0000. For 12V DC systems. Jabsco diaphragm bilge pumps are self-priming, so they can be mounted above and outside of harsh bilge environments. Because they are mounted remotely, the intake hose can be routed to the lowest point of the bilge regardless of space limitations. They are supplied with an in-line strainer to prevent damaging debris from entering pump. The reliable diaphragm design is not damaged by dry running.

Specifications

• Flow Rate: Nominal 8 GPM (475 GPH)
• Self-Priming From Dry Up to 7.8ft (2.4m)
• 3/4" hose barb port type
• Draws 11 amps at 12V DC and requires 15 amp fuse size

Features

• Diaphragm Design Allows Dry Running.
• Quiet Operation.
• Permanently Lubricated Ball Bearings on Shaft and Connecting Rod.
• Large Vibration Absorbing Pads.
• Corrosion Resistant Materials Throughout for Sea Water Service.
• Meets USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection.

Share this product:
PinterestTwitterFacebook